Micro Ultracentrifuge

Equipment Introduction

The CS150NX is one kind of tabletop micro ultraceentrifuge. It takes just 8 seconds(minimum) to be ready for operation since power switch is turn on. It takes only 90 seconds to reach 150,000rpm (RCF:1,050,000xg) by himac original vacuumed drive unit. Non-contact imbalance sensor always monitors vibration of the rotor and drive shaft. In case of abnormal vibration, the sensor activates and stops operation immediately.

Specification

Maximum speed (rpm)	150,000
Maximum RCF (x g)	1,050,000 (S140AT rotor)
Speed control accuracy (rpm)	+/-50 (5,000 - 150,000)
Set speed	5,000 rpm to maximum speed in increments of 1,000 rpm
Vacuum system	Oil rotary vacuum pump and oil diffusion pump combined Ultimate vacuum: below 0.6 Pa (0.005 Torr)
Timer	1 min. to 99 hrs. and 59 min. with HOLD function, with RTC function
Rotor Temp. control range	0 - 40 degree C (1 degree increments)
Rotor cooling method	Thermo-module cooling system (HCF free)
Rotor setting method	Self - Locking System

Rotors	S110AT (Fixed-angle rotor)	S120AT3 (Fixed-angle rotor)
Max. speed	110,000 (rpm)	120,000 (rpm)
Max. RCF	691,000 x g	650,000 × g
K-factor	15	8
Autoclavable	No	No
Borehole angle	30°	30°
Actual capacity	8 x 3.4 mL	14 x 0.5 mL
Max.radius	51.1 mm	40.4 mm

Brochure

CS150NX_Brochure_EN